Generic

Wire Stripping Machine | Black | 21x14x3.5cm | 2-25mm Diameter Range | Hand Crank or Drill Powered | Alloy Steel Blades | Iron Body | Bench-Mount or Portable | Scrap & Household Cable

£23.29

~~£0.00~~ £23.29

Sale Sold out

Taxes included. Shipping calculated at checkout.

A Wire Stripping Machine in Black — 21x14x3.5cm, 2–25mm Diameter Range, Hand Crank or Drill Powered, Reinforced Aluminium Body, Alloy Steel Blades, Bench-Mount or Portable

A wire stripping machine in black, measuring 21cm long, 14cm wide and 3.5cm deep, weighing 1kg. The body is reinforced aluminium with alloy steel blades that cut through the outer sheath of cables from 2mm to 25mm in diameter. The entry panel height is adjustable to set the blade depth for each cable size. Operates in two modes: hand crank for manual use or drill-powered for faster continuous stripping. Can be fixed to a workbench using the four included screws or used free-standing. Suitable for stripping scrap wire, single-core cable, household wiring and industrial cable to retrieve the copper core. Includes two hex keys, a fixed wrench, four fixing screws and a hand crank.

Why You’ll Love It

Operates by hand crank or by connecting to a power drill, allowing the same machine to be used at low speed for precision work on individual cables or at higher speed when processing a large volume of scrap wire — A dedicated hand-crank-only stripper requires continuous manual effort throughout a stripping session, which causes arm fatigue when processing more than a small quantity of cable, while a drill-only machine cannot be used without a drill present — this dual-mode design allows the user to work manually when stripping a small number of cables where drill setup time would exceed the time saved, and to attach a drill for sustained high-volume processing where manual cranking would be too slow or tiring, using the same machine for both scenarios without compromise.
Adjustable entry panel height sets the blade depth to match each cable diameter from 2mm to 25mm, preventing the blades from cutting into the copper core when stripping thinner cables and ensuring full sheath penetration on thicker cables without requiring a separate tool for each size — Fixed-depth wire strippers sized for a specific cable diameter will either fail to cut through the sheath on thicker cables or will cut into the copper core on thinner cables, damaging the conductor and reducing the scrap value of the recovered copper — the adjustable panel on this machine allows the cutting depth to be set precisely for each cable diameter within the 2–25mm range, protecting the copper core on thin cables while ensuring clean, full-depth sheath removal on larger diameter cables without changing tools.
Four fixing screws allow the machine to be clamped to a workbench for stable two-handed feeding of cable through the stripping mechanism, or used without mounting for portability between locations — A wire stripping machine that moves during operation requires one hand to hold it steady and one hand to feed cable, reducing both throughput and control over cable alignment through the blades — mounting the machine to a workbench using the four included screws keeps the chassis stationary under load, freeing both hands to guide cable through the entry panel at a consistent angle, which improves strip quality on longer cable runs and reduces the risk of the cable pulling through at an angle that causes the blade to cut unevenly across the sheath.