Outsunny

2800W Industrial PTC Ceramic Fan Heater | 3 Modes Fan 1400W 2800W | Manual Tilt | Stepless Thermostat | Thermal Cutout | IP20 | 28m² | Fume-Free | Carry Handle | 26.5x21x29cm | Orange & Black

Title Orange

£48.83

Sale Sold out

Taxes included. Shipping calculated at checkout.

Instant Industrial Heat for Garages, Workshops and Sheds — 2800W PTC Ceramic Fan Heater with Manual Tilt and Stepless Thermostat

Bring rapid, powerful warmth to unheated work spaces with this 2800W industrial PTC ceramic fan heater in orange and black. The PTC ceramic heating element reaches working temperature almost instantly — without the warm-up delay of wire-element fan heaters — and self-regulates its surface temperature to prevent overheating, making it inherently safer and more consistent than conventional heating elements under variable load conditions. Three operating modes — 25W fan only, 1400W low heat and 2800W high heat — cover everything from air circulation in summer to maximum heat output during winter working sessions, with the stepless thermostat allowing the target temperature to be set continuously rather than stepping between fixed settings, so the heater cycles on and off to hold the room at exactly the warmth level required. Manual vertical tilt adjustment directs the airflow precisely where heat is needed rather than projecting it straight ahead at a fixed angle. Covers up to 28m². Built from 0.8mm cold-rolled steel with a corrosion-resistant powder coating. Automatic thermal cutout shuts the unit off instantly if it overheats. IP20 rated. Fume-free and odour-free with no open flame or moisture generation. Carry handle on top. 1.3m power cable. 220–240V 50Hz. Overall: 26.5L x 21W x 29H cm. Item Ref: 842-508V70OG.

Why You’ll Love It

PTC ceramic element heats almost instantly and self-regulates to prevent overheating — The industrial heater’s PTC (positive temperature coefficient) ceramic heating plate reaches working temperature within seconds of being switched on — unlike conventional wire-element fan heaters that take a minute or more to build heat output — and the electrical resistance of the PTC ceramic increases naturally as the element temperature rises, reducing the current flowing through it and self-limiting the surface temperature without requiring additional control circuitry to prevent the element from overheating — making the heating element inherently safer and more consistent in performance than a fixed-resistance element under varying load and airflow conditions.
Stepless thermostat holds the exact target temperature continuously — The industrial heater’s stepless thermostat allows the desired room temperature to be set at any point within the available range — rather than selecting from two or three fixed temperature settings that may be too warm or not warm enough for the actual working conditions — and cycles the heater on and off automatically to maintain the set temperature, so the heater provides only the heat output required to hold the workspace at the target level rather than running at full output continuously and overheating the space.
Manual tilt adjustment directs 2800W of airflow precisely to where it is needed — The industrial heater’s manual vertical tilt mechanism allows the heater head to be angled upward or downward from the horizontal position — directing the heated airflow toward the floor in front of a workbench to warm the occupied working zone at leg level, angling it upward to push warm air across the upper portion of a garage or workshop, or aiming it directly at a specific task area that requires concentrated warmth — rather than projecting all 2800W of heated output at a fixed horizontal angle regardless of where warmth is actually needed in the space.
Cold-rolled steel construction with thermal cutout and IP20 rating for demanding use environments — The industrial heater’s 0.8mm cold-rolled steel body with corrosion-resistant powder coating is built to withstand the dust, knocks and temperature extremes of garage, workshop and shed environments rather than the controlled conditions of a domestic living room — while the automatic thermal cutout provides a final layer of protection by shutting the unit off instantly if the internal temperature exceeds safe operating limits due to blocked airflow or continuous high-output operation, and the IP20 rating confirms protection against solid objects larger than 12.5mm entering the unit.